Spacez insight · April 2026 · 6 min read

Commercial Fitout Cost Per Square Metre Melbourne

1. Cost per sqm is an average, not a quote. A cost-per-sqm figure averages the total fitout cost across the total floor area. A 200 sqm office with the same…

Commercial Fitout Cost Per Square Metre Melbourne

The Reality of Fitout Cost Per Square Metre

Before the tables, three important qualifications:

1. Cost per sqm is an average, not a quote. A cost-per-sqm figure averages the total fitout cost across the total floor area. A 200 sqm office with the same specification costs a higher rate per sqm than a 500 sqm office with the same specification — because fixed costs (project management, electrical sub-board, HVAC commissioning, building permit) are spread across fewer square metres.

2. Specification drives cost more than size. The difference between a functional and a premium office fitout is $800–$1,500/sqm — a larger range than the size effect. Getting the specification right matters more than getting the sqm rate right.

3. Site conditions add cost. A base building shell requires a full fitout from scratch; a previously tenanted space that needs a strip-out before re-fitting adds $50–$200/sqm; a tenancy with heritage constraints or complex services adds further. The cost-per-sqm benchmarks below assume a standard base building or recently vacated tenancy in reasonable condition.

Office Fitout Cost Per Square Metre — Melbourne 2026

Specification TierDescriptionCost per sqm
FunctionalStandard finishes, budget furniture, basic joinery. Carpet tile, painted plasterboard, grid ceiling with standard tiles. 1–2 meeting rooms, basic kitchen.$900–$1,400/sqm
Mid-marketConsidered design, quality materials, custom joinery. Mix of hard and soft flooring. Multiple meeting rooms with AV. Acoustic treatment.$1,400–$2,200/sqm
PremiumPremium materials throughout, bespoke joinery, high-quality furniture. Hybrid-first AV, phone booths, designed social space.$2,200–$3,500/sqm
LuxuryFully custom, premium finishes at every touch point. Bespoke reception, premium stone and timber, designer lighting.$3,500–$6,000+/sqm

What drives the cost within each tier:

  • Meeting room count and AV specification — each fully fitted meeting room adds $25,000–$80,000 depending on size and AV
  • Phone booths — proprietary booths cost $8,000–$25,000 each; custom-built are cheaper but less acoustic
  • Joinery quality — bespoke custom joinery vs. semi-custom vs. off-the-shelf
  • Sit-stand desks — $1,200–$2,500 per desk premium over fixed-height
  • Floor specification — polished concrete ($60–$150/sqm) vs. carpet tile ($30–$65/sqm); the irony is that polished concrete often costs more, not less

Retail Fitout Cost Per Square Metre — Melbourne 2026

Location / TypeSpecificationCost per sqm
Suburban high street (functional)Standard fitout for independent operator$700–$1,400/sqm
Suburban high street (mid-market)Quality materials, custom joinery, considered lighting$1,400–$2,500/sqm
Inner-city strip retail (Chapel St, Smith St, High St)Premium materials, bespoke fitout$2,000–$5,000+/sqm
Major shopping centre tenancyTDA-compliant; varies by category$1,400–$4,500+/sqm
Premium fashion / jewelleryLuxury fit-out standard$3,500–$8,000+/sqm
Food / beverage (café, QSR)Commercial kitchen + front of house$1,800–$3,500/sqm

Key retail cost drivers:

  • Shopfront (window, glazing, signage) — premium shopfronts cost $30,000–$150,000+
  • Bespoke joinery and display fixtures — the largest variable in retail fitout cost
  • Lighting design — premium retail lighting (track, feature pendants, backlit displays) adds $20,000–$80,000 for a 150 sqm store
  • Heritage planning permit — if required, adds 10–16 weeks and $5,000–$15,000 in permit costs

Hospitality Fitout Cost Per Square Metre — Melbourne 2026

TypeSpecificationCost per sqm
Café (functional fit-out)Standard commercial kitchen, basic front of house$1,200–$2,000/sqm
Café (design-led)Custom joinery, quality materials, feature lighting$2,000–$3,500/sqm
Restaurant (mid-market)Full commercial kitchen, designed dining room$2,000–$4,000/sqm
Restaurant (premium)Premium materials, custom joinery, wine storage, bar$3,500–$6,500+/sqm
Bar / licensed venueFull bar with custom joinery, AV, acoustic treatment$3,000–$7,000+/sqm
Fast food / QSRHigh-spec commercial kitchen, branded fitout$2,500–$5,000/sqm

Hospitality cost note: Kitchen equipment (commercial refrigeration, cooking equipment, exhaust canopy, grease interceptor, dishwasher) is often supplied by the operator and excluded from the builder's fitout scope. Kitchen equipment costs for a full-service restaurant are typically $80,000–$250,000+ on top of the fitout cost.

Medical Fitout Cost Per Square Metre — Melbourne 2026

Practice TypeSpecificationCost per sqm
Bulk billing GP clinicNCC 9a compliant, functional finishes$1,500–$2,200/sqm
Private GP / mixed billingPremium patient experience, quality finishes$2,000–$3,200/sqm
Dental clinicClinical spec, sterilisation room, radiology shielding$2,500–$4,000/sqm
Specialist medicalClinical rooms, premium finishes$2,200–$3,800/sqm
Allied health (physio, psychology)Mid-clinical spec, treatment rooms$1,600–$2,800/sqm
PharmacyRetail + clinical dispensing, cool room$1,800–$3,200/sqm
Veterinary clinicClinical spec, floor drainage, surgical suite$2,000–$4,000+/sqm

Medical cost premium over standard office: $400–$1,200/sqm, driven by infection control finishes, hand basins in every room, sterilisation room plumbing, radiation shielding (where applicable), and NCC 9a accessible design compliance.

Specialist / Other Fitout Cost Per Square Metre — Melbourne 2026

TypeCost per sqm
Aged care fitout$2,500–$5,000+/sqm
Childcare / early learning$2,000–$3,500/sqm
Hair salon$1,400–$5,500+/sqm
Nail salon$1,200–$5,500+/sqm
Beauty salon / cosmetic clinic$2,000–$5,000+/sqm
Pilates / reformer studio$1,200–$3,500/sqm
Gym / fitness studio$800–$2,500/sqm
Warehouse office / mezzanine$600–$1,400/sqm
Industrial amenity (kitchen, change rooms)$500–$1,200/sqm
Education / training facility$1,500–$3,000/sqm

What Affects Cost Per Square Metre

Office Size Effect

Smaller offices cost more per sqm than larger offices at the same specification:

Office SizeApproximate Premium vs. 500 sqm
50–100 sqm+40–60% per sqm
100–200 sqm+20–35% per sqm
200–400 sqm+10–20% per sqm
400–700 sqmBaseline
700–1,500 sqm-5–10% per sqm
1,500 sqm+-10–20% per sqm

The reason: fixed costs (project management, electrical board, HVAC commissioning, building permit, joinery design and fabrication setup) are shared across the total floor area. In a 50 sqm office, these fixed costs represent a very high share of the total; in a 1,500 sqm office, they are a smaller share.

Base Building Condition

ConditionEffect on Cost
Fresh base building (never tenanted)Baseline
Existing fitout (well-maintained, reusable elements)-$50–$150/sqm (savings from reused elements)
Existing fitout requiring strip-out+$50–$200/sqm for strip-out and disposal
Cold shell (no services, no ceilings)Add $150–$400/sqm for services rough-in
Heritage building (complex compliance)+$100–$500/sqm depending on constraints

Building Location

LocationCost Premium
CBD A-grade tower+10–20% (building requirements, after-hours, logistics)
CBD B/C-gradeBaseline
Inner suburban-5–10%
Outer suburban-10–20%
Regional (Geelong, Ballarat)-15–25%

Current Melbourne Fitout Market Conditions (2026)

Key factors affecting fitout costs in Melbourne in 2026:

Labour: Melbourne's commercial fitout trade is operating at near-capacity; lead times for quality subcontractors (particularly electricians, plumbers, and specialist glazing) are extended. Labour costs have increased 12–18% over the past three years.

Materials: Joinery timber, steel, and acoustic products remain elevated relative to pre-2020 prices. LED lighting and technology components have stabilised.

Joinery lead times: 5–8 weeks from order to delivery is the current standard; premium bespoke joinery may be 8–12 weeks. This is the most common cause of programme delays.

Building permits: Turnaround times from Private Building Surveyors are currently 2–4 weeks for standard fitouts; complex or larger projects may be longer.

Getting an Accurate Quote

A cost-per-sqm benchmark helps set initial expectations, but an accurate project cost requires:

  1. A written brief (who uses the space, how many rooms, what specification, what timeline — see our How to Brief a Fitout Builder guide)
  2. A site inspection — condition, access, services
  3. A detailed design from which the builder prices actual materials and labour

The difference between a cost-per-sqm estimate and a detailed project quote is typically ±30% for the estimate vs ±5–10% for a detailed quote. Get to a detailed quote before committing to a lease or budget.

Spacez provides detailed fitout cost estimates and fixed-price quotes for commercial fitouts across Melbourne. Contact us for a free site assessment and indicative budget.