Spacez insight · March 2026 · 12 min read

Make Good Requirements: Your Complete Guide to End-of-Lease Obligations in Melbourne

Understand make good requirements for commercial leases in Melbourne. Covers obligations, costs, negotiation tips & timelines. Get a free quote — 0447 064…

Make Good Requirements: Your Complete Guide to End-of-Lease Obligations in Melbourne

When your commercial lease is winding down, the make good clause is one obligation you cannot afford to overlook. For Melbourne tenants, the process of restoring a premises to its original condition can mean the difference between a clean exit and a costly dispute with your landlord.

Make good requirements vary from lease to lease, but the fundamentals are consistent across most commercial properties in Victoria. Whether you occupy a small office in the CBD, a retail shopfront in Chapel Street, or a warehouse in Tullamarine, understanding exactly what is expected of you — and planning well ahead — is essential.

This guide breaks down everything Melbourne tenants need to know about make good obligations, from what the term actually means through to negotiation strategies, typical costs, and practical timelines.

What Are Make Good Requirements?

Make good requirements refer to the contractual obligations a tenant must fulfil when vacating a commercial premises at the end of a lease. In simple terms, you are required to return the space to its original condition — the state it was in when you first took possession.

This obligation is standard in virtually all commercial leases across Melbourne and Victoria. It exists to protect the landlord's asset and ensure the premises is ready for the next tenant or for re-leasing without the landlord bearing restoration costs.

The scope of make good works can range from minor touch-ups to a full strip out, depending on how extensively you modified the space during your tenancy. If you installed partitions, upgraded the kitchen, changed the flooring, or reconfigured electrical and data cabling, all of those modifications will typically need to be reversed.

It is worth noting that make good is distinct from general wear and tear. Fair wear and tear — the natural ageing and minor deterioration that occurs through normal use — is usually excluded from make good obligations. Scuff marks on walls from everyday use, slight carpet wear in high-traffic areas, and minor fading of paint are generally considered acceptable. However, the line between fair wear and tear and a make good obligation can be a point of contention, which is why having clear documentation from day one matters enormously.

Common Make Good Requirements in Melbourne Commercial Leases

While every lease is different, most make good clauses in Melbourne commercial properties include a similar set of requirements. Here is what tenants are typically expected to address.

Removal of Partitions, Walls, and Built Structures

Any internal walls, partitions, meeting rooms, or built-in storage that you added during your tenancy will usually need to be demolished and removed. This includes plasterboard walls, glass partitions, and timber framing. The area must be restored to its original open-plan layout or previous configuration.

Floor Restoration

Flooring is one of the most common make good items. If you laid new carpet tiles, vinyl, timber, or any other flooring material over the existing floor, it must be removed and the original surface restored. In many Melbourne CBD offices, this means returning to the base building carpet or concrete finish.

Ceiling and Lighting Works

Modifications to suspended ceilings, the addition of feature lighting, removal of ceiling tiles, or changes to light fittings all fall under make good. You will need to reinstate the original ceiling grid, replace damaged tiles, and restore the base building lighting layout.

Painting and Wall Finishes

Walls must be repainted in the original colour scheme. Any wallpaper, feature walls, vinyl wraps, or decorative finishes you applied during the tenancy need to be removed and the walls returned to their prior condition. In practice, most landlords expect a full repaint of all walls in the original neutral tones.

Electrical, Data, and Communications

Any modifications to the electrical layout — additional power points, dedicated circuits, data cabling runs, server room wiring, or supplementary distribution boards — typically need to be reversed. Cabling must be removed back to the original patch panels or distribution points.

HVAC and Mechanical Services

If you altered the heating, ventilation, or air conditioning system — whether that involved adding split systems, relocating diffusers, or modifying ductwork — these changes will need to be restored. HVAC reinstatement can be one of the more expensive components of a make good project.

Signage and Branding Removal

All external and internal signage, logos, window decals, reception branding, and wayfinding elements must be removed. Any fixings, adhesive residue, or surface damage caused by signage installation must also be repaired.

Kitchen and Amenities

Tenant-installed kitchens, breakout areas, shower facilities, or amenity upgrades must be removed unless the landlord agrees in writing to retain them. Plumbing connections added during the fit out generally need to be capped off and restored.

Understanding Your Make Good Clause

Your lease document is the single most important reference point for understanding your specific make good obligations. Not all clauses are written the same way, and the details can significantly affect your scope of works and costs.

Key Elements to Review

When reviewing your make good clause, pay close attention to the following.

Definition of "original condition": Does your lease define this clearly? Some leases reference the condition at the commencement date, while others reference the condition described in a schedule or condition report. If a photographic condition report was prepared at lease commencement, this becomes the benchmark.

Scope of works: Some clauses require a full strip out back to base building condition, while others only require the removal of specific tenant improvements. The wording matters — a clause requiring you to restore the premises to "base building condition" is very different from one requiring you to leave the premises in "good and tenantable repair."

Timeline and notice requirements: Most leases specify when make good works must be completed — often before the lease expiry date, not after. Some require you to submit a scope of works to the landlord for approval before commencing. Missing these deadlines can result in penalties or the landlord engaging their own contractors at your expense.

Exemptions and landlord approvals: Check whether any modifications were approved by the landlord on the basis that they would not need to be reversed. These exemptions should be documented in writing — either in the lease itself, a licence to alter, or formal correspondence.

The Retail Leases Act 2003 (Victoria)

For retail tenants in Victoria, the Retail Leases Act 2003 provides additional protections. Under this legislation, landlords are required to act reasonably in relation to make good requirements. If a dispute arises, the Victorian Small Business Commission (VSBC) offers a mediation service, and unresolved matters can be referred to VCAT (the Victorian Civil and Administrative Tribunal) for determination.

The Act also requires that lease terms — including make good provisions — be disclosed before the lease is signed. If your landlord failed to provide proper disclosure, this may affect your obligations. It is always worth seeking legal advice if you believe your rights under the Act have not been met.

Negotiation Strategies for Make Good Obligations

Make good is not always a fixed obligation. In many cases, there is room to negotiate — both at the start of a lease and at the end. Here are strategies Melbourne tenants use to manage their exposure.

Negotiate at Lease Commencement

The best time to negotiate make good terms is before you sign the lease. Consider pushing for provisions such as a cap on make good costs, specific exclusions for improvements that add value to the premises, or a clause allowing a cash settlement in lieu of physical works. The landlord is most motivated to negotiate when they want to secure you as a tenant.

Negotiate at Lease End

Even if your lease has a standard make good clause, many landlords are open to negotiation when the lease is ending. If the next tenant plans to fit out the space differently, your landlord may agree to a reduced scope or a cash settlement. A landlord who is planning their own refurbishment has little incentive to make you strip out everything only to demolish it again.

Cash Settlements

A cash settlement — sometimes called a "make good contribution" — is an agreed sum paid to the landlord instead of completing physical works. This can be advantageous for both parties: the tenant avoids the disruption and project management burden, while the landlord receives funds they can apply as they see fit. Cash settlements are particularly common in Melbourne's CBD office market.

Document Everything

Before commencing any negotiation, get a professional assessment of the required works and associated costs. Having a clear, itemised scope and cost estimate gives you a strong foundation for negotiation. It also demonstrates to the landlord that you are taking the process seriously and approaching it professionally.

If you are unsure where to start, our team can provide a make good assessment to establish the full scope of works and give you a clear picture of costs before you enter negotiations.

Make Good Costs: What Melbourne Tenants Should Expect

Make good costs in Melbourne vary significantly depending on the size of the premises, the extent of modifications made during the tenancy, and the specific requirements of the lease clause.

As a general guide, tenants in Melbourne can expect to pay anywhere from $50 to $150 or more per square metre for make good works. A standard office strip out in the CBD might sit around $80 to $120 per square metre, while premises with complex services modifications, specialised fitouts, or heritage considerations can push costs higher.

We have published a detailed breakdown of current pricing in our make good costs guide for Melbourne in 2026, which covers cost ranges by premises type, common cost drivers, and ways to reduce your overall spend.

Key factors that influence make good costs include:

  • Premises size — larger spaces cost more in absolute terms but may benefit from economies of scale
  • Extent of tenant modifications — the more you changed, the more there is to reverse
  • Services complexity — HVAC, electrical, and plumbing reinstatement are the most expensive items
  • Access and logistics — CBD high-rise buildings with restricted loading dock access and after-hours work requirements add to costs
  • Landlord expectations — some landlords require a higher standard of finish than others
  • Waste disposal — demolition waste, particularly for larger strip outs, adds to the overall budget

Ready to understand your make good costs? Contact our team for a free, no-obligation assessment and quote.

Make Good Timeline: When to Start Planning

One of the most common mistakes Melbourne tenants make is leaving their make good planning too late. A well-managed make good project requires adequate lead time for assessment, landlord negotiation, contractor engagement, and physical works.

12 Months Before Lease Expiry

Begin reviewing your lease clause and assessing the likely scope of works. Engage a commercial fitout specialist to conduct a preliminary assessment. This gives you time to budget appropriately and begin discussions with your landlord.

6 Months Before Lease Expiry

Finalise the scope of works with your landlord and obtain any required approvals. If you are relocating, this is also the time to coordinate your office relocation with your make good timeline to avoid overlap or gaps.

3 Months Before Lease Expiry

Engage your make good contractor and confirm the project schedule. For larger premises, works may take four to eight weeks, so allow adequate time within your lease term. Remember that most leases require works to be completed before the expiry date, not after.

Final Weeks

Complete all works, arrange final cleaning, and coordinate the landlord's inspection and sign-off. Obtain any required compliance certificates, and ensure you have photographic evidence of the completed works for your records.

Frequently Asked Questions About Make Good Requirements

What is a make good clause in a commercial lease?

A make good clause is a provision in a commercial lease that requires the tenant to restore the premises to its original condition at the end of the lease term. This typically means removing all tenant improvements, fixtures, and fittings, and returning the space to the state it was in at lease commencement. The specific scope depends on the wording of your individual lease.

Who is responsible for make good at end of lease?

The tenant is responsible for completing make good works unless the lease states otherwise. In some cases, the landlord may agree to a reduced scope or a cash settlement, but the default obligation sits with the tenant. If you fail to complete the works, the landlord can engage their own contractors and recover the costs from you — often at a higher price than if you had managed the process yourself.

Can I negotiate my make good obligations?

Yes. Make good obligations are negotiable, both at lease commencement and at lease end. Common negotiation outcomes include a reduced scope of works, a cash settlement in lieu of physical reinstatement, extended timelines, or the landlord agreeing to retain certain improvements. The strength of your negotiating position depends on the landlord's plans for the premises and the current market conditions.

What happens if I do not complete make good works?

If you fail to complete make good works by the required date, the landlord can engage contractors to carry out the works and charge the costs back to you. In most cases, the landlord will also claim the costs of the premises being unavailable for re-leasing during the additional works period. For retail tenants in Victoria, disputes can be referred to the Victorian Small Business Commission or VCAT for resolution.

What is the difference between make good and a strip out?

A strip out is the demolition and removal component of a make good project — taking out partitions, flooring, ceilings, and services. Make good is the broader obligation, which includes the strip out plus the reinstatement of the premises to its original condition. Think of the strip out as step one and the full restoration as step two.

How much does make good cost in Melbourne?

Costs typically range from $50 to $150+ per square metre depending on the scope of works, premises type, and complexity of services. For a detailed cost breakdown, see our make good costs guide for Melbourne.

How Spacez Can Help With Your Make Good

At Spacez, we handle make good projects across Melbourne every week — from compact office strip outs in the CBD to large-scale warehouse restorations in the outer suburbs. With 15+ years of experience in commercial fitouts and make good works, our team understands exactly what landlords expect and how to deliver it efficiently.

We manage the entire process from initial assessment and scope agreement through to completion and landlord sign-off. Our project managers coordinate all trades, handle waste disposal, and ensure works are completed on time and on budget — so you can focus on your business transition rather than managing a construction project.

Need help with your make good obligations? Get in touch with our team for a free consultation and quote. Call us on 0447 064 489 or request a quote online.