Spacez insight · March 2026 · 7 min read
Commercial Fitout Insurance Melbourne | Builder Insurance Guide
Understanding commercial fitout insurance requirements in Melbourne — contract works insurance, public liability, professional indemnity, and what to check…
Commercial Fitout Insurance Melbourne
Insurance is one of the less-discussed but critically important aspects of a commercial fitout project. A fitout involves construction activity in an occupied (or soon-to-be-occupied) commercial tenancy — with real financial exposure for the building owner, the landlord, the incoming tenant, and the fitout builder if something goes wrong.
Understanding what insurance is required, who needs to hold it, and how to verify coverage before the project starts protects everyone involved and is a standard due diligence step before appointing a fitout builder.
Key Insurance Policies for Fitout Projects
1. Contract Works Insurance (Builder's Risk)
What it covers: Physical loss or damage to the fitout works during construction — materials, equipment, partially completed work — arising from perils including fire, theft, storm, water damage, and accidental damage.
Who holds it: Typically the fitout builder (contractor), as specified in the construction contract. Some contracts require the principal (the client) to take out contract works insurance; most standard commercial fitout contracts place this obligation on the contractor.
Why it matters: If the fitout is partially completed and is damaged by fire or flood, contract works insurance pays to reinstate the works. Without it, the cost falls on whoever owns the materials and work at the time of loss.
Key coverage elements:
- Sum insured: must equal the full contract sum (replacement value of all works in place)
- Period: from commencement of works through to practical completion (and often extending through the DLP)
- Off-site materials: covers materials purchased for the project but not yet incorporated into the works (stored at a factory or warehouse)
- Existing property: covers accidental damage to the existing building/tenancy caused by the construction works
What to ask your builder: Request a certificate of currency confirming contract works insurance is in place before works commence, confirming: the insurer's name, the policy number, the period of cover, and the sum insured.
2. Public Liability Insurance
What it covers: Third-party bodily injury and property damage claims arising from the contractor's activities on the project site. For example: a subcontractor's work causes a water leak that damages the tenant below; a visitor to the site is injured by construction equipment; a worker drops a tool that damages a customer's vehicle in the car park.
Who holds it: The fitout contractor; and typically each subcontractor for their own activities.
Why it matters: Construction activities create real risk of third-party injury or property damage. Public liability insurance protects the contractor and (under most standard contracts) provides contractual indemnity to the client if the contractor's works cause a third-party claim.
Minimum coverage levels:
- Most building owners, landlords, and major shopping centre managers require a minimum of $20 million public liability per occurrence as a condition of granting access to the site
- Some premium building owners (CBD towers, major shopping centres) require $50 million+
- Standard commercial fitout contracts typically specify $10–$20 million minimum
What to ask your builder: Request a certificate of currency confirming:
- Public liability cover of at least $20 million per occurrence
- The activities covered include commercial construction and fitout works
- The policy period covers the project duration
Subcontractor public liability: The head contractor's public liability policy typically covers the contractor's own activities but does not automatically extend to subcontractors. Ask how subcontractor liability is managed — either the head contractor's policy includes subcontractors as "principals/subcontractors" or each subcontractor maintains their own policy.
3. Workers Compensation Insurance (WorkCover)
What it covers: Work-related injuries and illnesses suffered by employees and deemed workers engaged in the construction works.
Who holds it: All employers are legally required to hold WorkCover insurance in Victoria (administered by WorkSafe Victoria through licensed insurers). A fitout contractor without WorkCover is operating illegally.
Why it matters: If a worker is injured on the fitout site, WorkCover provides the injured worker's compensation. Without it, the employer is personally liable for compensation, which can be enormous for serious injuries.
What to ask: Request a certificate of currency confirming WorkCover insurance is current for all workers on the project. For subcontractors providing labour, confirm they hold their own WorkCover (or are covered under the head contractor's policy as deemed workers).
4. Professional Indemnity Insurance
What it covers: Claims arising from the professional services (design, advice, drawings, specifications) provided by the builder, designer, or consultant. If the builder's design is defective and this causes loss to the client, professional indemnity insurance covers the claim.
Who needs it:
- Design-and-construct (D&C) contractors who take responsibility for design as well as construction
- Architects, interior designers, and fitout consultants who provide design services
- Engineers and specialist consultants (HVAC engineers, acoustic consultants, structural engineers) engaged on the project
Standard coverage levels: $5 million to $20 million per claim, depending on the project value and the nature of the professional services.
Why it matters for D&C fitouts: In a design-and-construct contract, the builder is responsible for both the design and the construction. If a design defect causes loss (a wall specified incorrectly, a structural design error, a mechanical design that doesn't meet the brief), professional indemnity covers the claim against the designer/builder.
5. Builders Warranty Insurance (Domestic Building)
What it covers: This insurance is specific to domestic building work (residential) — it is required by law in Victoria for domestic building projects over $16,000. It provides cover for incomplete or defective work if the builder becomes insolvent, dies, or disappears.
Who holds it: The builder (registered building practitioner), for domestic building projects exceeding the threshold.
Relevant to commercial fitouts? Builders warranty insurance is a residential-only obligation — it does not apply to purely commercial fitout works. However, if the fitout is in a mixed-use building with a residential component, or involves works to a dwelling, the obligation may apply. Check with your building surveyor and the relevant registered building practitioner.
Insurance Obligations on the Client (Tenant) Side
The tenant (fitout client) also has insurance obligations:
Landlord's Building Insurance — Notification and Compliance
Most commercial leases require the tenant to:
- Notify the landlord before commencing fitout works (the landlord's building insurance may require notification of construction activities in the building)
- Not void the landlord's building insurance — any construction activity that would invalidate the landlord's insurance creates a liability for the tenant
- In some leases, obtain the landlord's written approval for the insurance arrangements for the fitout works
Action: Before commencing fitout works, review the lease for insurance notification requirements and write to the landlord/property manager confirming that the fitout contractor holds contract works and public liability insurance at the required levels.
Tenant's Own Contents and Business Insurance
The tenant's own insurance (contents, business interruption, public liability) is separate from the construction insurance and typically commences when the tenant takes occupation. Ensure that the transition from the construction period (covered by the builder's contract works policy) to the trading period (covered by the tenant's own policies) is seamless — with no gap in coverage.
Verifying Insurance Before Appointing a Builder
The insurance verification checklist before appointing a commercial fitout builder:
| Insurance Type | Minimum Requirement | How to Verify |
|---|---|---|
| Contract works | Full contract sum | Certificate of currency; confirm sum insured and period |
| Public liability | $20 million per occurrence minimum | Certificate of currency; confirm limit and activities covered |
| Workers compensation (WorkCover) | Current and valid for all workers | Certificate of currency from WorkSafe-licensed insurer |
| Professional indemnity (D&C) | $5–$10 million per claim | Certificate of currency; confirm retroactive date |
| Subcontractor public liability | Each sub holds own cover or covered under head policy | Ask head contractor's policy wording |
Certificate of currency: A certificate of currency is a document issued by the insurer confirming the existence and key details of an insurance policy at a point in time. It is not the policy itself, but it is the standard verification document used in the construction industry.
Key things to check on a certificate of currency:
- Insurer is a licensed Australian insurer (APRA-regulated)
- The insured party is the entity you are contracting with
- The period of cover covers the project dates
- The policy type matches what is represented (e.g., confirm it actually says "Contract Works" not just "Property")
- The sum insured / limit of liability is sufficient
Frequently Asked Questions
What insurance does a commercial fitout builder in Melbourne need?
At minimum: contract works insurance (for the works), public liability (minimum $20 million in most commercial building contexts), and WorkCover for all workers. For design-and-construct builders, professional indemnity insurance is also required.
Does the builder's public liability insurance cover me as the client if a third party is injured?
Typically yes — most standard commercial fitout contracts (and most commercial construction public liability policies) provide contractual indemnity to the principal (client) and the building owner for claims arising from the contractor's works. Review the contract and the policy to confirm the extent of cross-liability coverage.
Is builders warranty insurance required for commercial fitouts?
No — builders warranty insurance (also called domestic building insurance or builder's indemnity insurance) is a residential-only obligation in Victoria. It applies to domestic building work over $16,000. A purely commercial fitout does not require builders warranty insurance, though the client's rights are protected by the contract's DLP provisions, ACL guarantees, and the professional indemnity insurance of design professionals.
Spacez holds all required insurances for commercial fitout construction in Melbourne — contract works, public liability ($20 million), WorkCover, and professional indemnity for design-and-construct projects. Certificates of currency are provided as standard before project commencement.