Spacez insight · March 2026 · 7 min read

Commercial Fitout vs Refurbishment Melbourne | What's the Difference?

Confused about fitout vs refurbishment vs renovation? Here's what each term means in Melbourne's commercial property market, when each approach applies, and…

Commercial Fitout vs Refurbishment Melbourne | What's the Difference?

Commercial Fitout vs Refurbishment: What's the Difference?

The terms "fitout," "refurbishment," and "renovation" are used loosely in the commercial property market — and sometimes interchangeably by the same people in the same conversation. For someone planning a commercial project, this ambiguity creates confusion: are you getting quotes for the same scope, or are different builders pricing fundamentally different things?

This article defines each term clearly, explains when each applies in the Melbourne commercial context, and helps you identify which category your project falls into.

Commercial Fitout — Definition

A commercial fitout (also written as "fit-out") is the process of taking a commercial tenancy from its base building condition and constructing the interior to suit the tenant's specific use.

What "base building condition" means:

In Melbourne commercial buildings, base building condition (also called "spec suite" or "cold shell") typically includes:

  • Structural slab and building core complete
  • HVAC supply and return in the ceiling, but not connected to any specific layout
  • Electrical supply to the distribution board, but no final runs, outlets, or lighting
  • Hydraulics (plumbing) roughed-in to the building core, but not to the tenancy layout
  • Fire services roughed-in (sprinkler heads in rough position pending final ceiling layout)
  • Lift core, staircases, and base building toilets complete

A fitout builds everything inside the tenancy from this starting point: partitions, ceilings, flooring, joinery, kitchen, bathrooms (if part of the tenancy), all final electrical and data, final HVAC distribution and commissioning, and all finishes.

Key characteristics of a fitout:

  • Typically occurs at the commencement of a new lease (the tenant designs and builds their fitout before moving in)
  • The landlord usually contributes a Tenant Improvement Allowance (TIA) toward the fitout cost
  • All works are to the tenant's brief and design
  • At end of lease, the tenant typically makes good — returning the space to base building condition

Melbourne examples of fitout scope:

  • A law firm taking a new tenancy in a St Kilda Road A-grade tower and building out reception, open plan workstations, meeting rooms, and staff kitchen from the raw floor plate
  • A medical group taking a new tenancy in a suburban medical centre building and constructing consultation rooms, reception, waiting, and clinical infrastructure from a shell
  • A hospitality operator taking a raw tenancy on Chapel Street and constructing a full restaurant fitout

Refurbishment — Definition

A refurbishment (also "refurb") is the partial or complete upgrade of an existing fitout — improving, updating, or extending what is already there without necessarily starting from scratch.

What distinguishes a refurbishment from a fitout:

  • The existing fitout remains substantially in place (or portions of it remain)
  • The works improve, upgrade, or adapt the existing condition
  • The starting point is an occupied or previously occupied tenancy with existing infrastructure, not a raw base building shell

Typical refurbishment scope:

  • Replacing carpet, ceiling tiles, and paintwork without reconfiguring the layout
  • Upgrading the kitchen without changing its position or the surrounding infrastructure
  • Adding a meeting room to an existing open plan area
  • Updating reception and front-of-house finishes while leaving back-of-house unchanged
  • Refreshing lighting (replacing old fluorescent fittings with LED) throughout the tenancy
  • Upgrading AV in meeting rooms
  • Replacing tired furniture without structural changes

Melbourne examples of refurbishment scope:

  • A firm at Year 5 of a 10-year lease freshening up the office with new carpet, repainted walls, new kitchen appliances, and upgraded meeting room AV — without moving walls or changing the layout
  • A retailer on Chapel Street updating the shopfront, new flooring, and new display lighting while retaining the existing counter and storage configuration
  • A medical practice updating the waiting area and reception finishes without changing the clinical room configuration

Renovation — Definition

"Renovation" is the most loosely used term in the commercial property context. In residential property, it typically means structural or significant cosmetic improvement. In commercial property, it is often used interchangeably with refurbishment or fitout — there is no standard industry definition.

In commercial fitout practice in Melbourne:

  • "Renovation" is most commonly used when the work involves modification to an existing fitout at a more structural or comprehensive level than a basic refurbishment
  • It implies more significant changes — moving walls, reconfiguring the layout, replacing services — not just a cosmetic refresh
  • Some operators use "renovation" to mean a full fitout of a tenancy that had a previous occupant's fitout in place

A practical distinction: If a builder is proposing to strip the existing fitout back to base building and start again, that is functionally equivalent to a new fitout even if the tenancy was previously occupied. If the builder is upgrading and improving an existing fitout while leaving a significant portion in place, that is a refurbishment or renovation.

The Summary Table

TermStarting ConditionScopeWhen It Applies
FitoutBase building / shellFull interior construction to tenant's briefNew lease, new tenancy, brand new office
RefurbishmentExisting fitout in placePartial upgrade, cosmetic refresh, targeted improvementsMid-lease refresh, lease extension, brand update
RenovationExisting fitout in placeMore significant changes including structural/layout reconfigurationSignificant mid-lease upgrade, repurposing for a new occupant
Strip-out and new fitoutExisting fitout (stripped)Strip existing; then new fitout from near-base conditionNew tenant in a previously occupied tenancy

When to Choose Each Approach

Choose a New Fitout When:

  • You are taking a new lease on a base building or shell tenancy
  • Your existing fitout is at end of life and the cost of refurbishment approaches the cost of a new fitout
  • Your business has changed significantly and the existing layout no longer serves your needs
  • You are relocating — the new premises require a fitout regardless

Choose a Refurbishment When:

  • You are mid-lease and extending, and the base layout is still functional
  • The brand needs refreshing but the infrastructure (partitions, services) is sound
  • Budget is constrained — a targeted refurbishment delivers the most visible improvement per dollar
  • You want to avoid the disruption of a full fitout (which typically requires vacating the premises during construction)

Choose a Renovation When:

  • The existing layout needs reconfiguration (adding meeting rooms, moving partitions) but the services are sound
  • You are preparing a previously tenanted space for a new occupant who wants changes to the existing fitout
  • The scope falls somewhere between a cosmetic refurbishment and a full strip-out and re-fit

Cost Comparison — Melbourne 2026

ApproachTypical Cost per sqmNotes
New fitout (mid-market office)$1,400–$2,200/sqmFull fit from shell or stripped tenancy
Refurbishment (cosmetic refresh)$200–$600/sqmCarpet, paint, lighting update; no major joinery or partitioning
Refurbishment (moderate — kitchen, some joinery)$500–$1,200/sqmUpgraded kitchen, new reception joinery, partial ceiling and lighting
Renovation (layout reconfiguration)$800–$1,600/sqmAdding/moving walls, joinery changes, partial services
Strip-out and new fitout$1,300–$2,200/sqmSimilar to new fitout; strip-out adds $50–$150/sqm

The cross-over point: When the cost of a comprehensive refurbishment or renovation exceeds 60–70% of the cost of a new fitout, the calculus typically favours a new fitout. A new fitout delivers a longer lifecycle (10–15 years vs. 5–8 years for a refurbishment), comes with warranties on all new elements, and allows full optimisation for the current use rather than working around an existing footprint.

How to Get Comparable Quotes

Because the terms "fitout," "refurbishment," and "renovation" are used inconsistently, when requesting quotes:

  1. Describe the starting condition precisely — what is currently in the tenancy (full existing fitout, partial fitout, stripped shell, base building)
  2. Specify what stays — list the elements that must remain intact (specific joinery, services, structure)
  3. Specify what is replaced or added — a room-by-room scope of what you want built, upgraded, or changed
  4. Share the lease context — remaining lease term, make-good obligations, landlord contribution

This allows multiple builders to quote against the same scope, making comparison meaningful.

Frequently Asked Questions

Does a refurbishment require a building permit?

Yes, if it involves structural changes, changes to fire systems, changes to HVAC, or changes to electrical systems. A purely cosmetic refresh (replacing carpet and repainting) may not require a permit, but any work involving services or structural elements requires a building permit in Victoria. Your builder will advise.

Does a mid-lease refurbishment require landlord approval?

In most Melbourne commercial leases, any works to the tenancy require landlord consent. Even a cosmetic refresh should be notified to the landlord (and consent obtained in writing) before works commence. More significant works (adding partitions, modifying services) require formal landlord approval and typically a landlord's fitout approval process.

Is it worth refurbishing rather than relocating to a new tenancy?

This is a genuine strategic decision that depends on lease terms, the quality of the existing fitout, and the availability and cost of alternative premises. We regularly assist clients with this analysis — the cost of a new fitout in a new tenancy must be compared against the cost of refurbishment plus the transaction costs of relocation (legal costs, downtime, removals, new fit-out less any TIA from the new landlord).

Spacez delivers commercial fitouts, refurbishments, and renovations across Melbourne. Contact us to discuss which approach is right for your project.