Spacez insight · March 2026 · 15 min read
End of Lease Make Good Melbourne: Your Complete Guide to Commercial Lease Obligations
End of lease make good in Melbourne costs $80-$350/sqm. Expert guide to obligations, negotiation, costs, and common pitfalls. Free quote from Spacez — call…
Key takeaways:
- End of lease make good costs in Melbourne typically range from $80 to $350 per square metre, depending on the scope of your lease obligations and the condition of the space
- Your make good obligation is defined by your commercial lease — review it 6 to 12 months before expiry to avoid surprises
- Make good usually involves a strip out of your fitout, followed by repairs, patching, painting, and reinstatement of base building services
- Negotiation with your landlord can significantly reduce your make good costs — especially if the incoming tenant wants to keep part of your fitout
- Failing to complete make good works on time can result in financial penalties, rent continuation, and legal disputes
If you hold a commercial lease in Melbourne, your make good obligations are one of the most significant financial liabilities you will face at the end of your tenancy. Yet many businesses only start thinking about make good in the final weeks of their lease — by which point their options are limited, costs are higher, and the risk of disputes with the landlord is substantial.
At Spacez, we have helped hundreds of Melbourne tenants navigate their end-of-lease make good obligations. We manage the entire process — from initial lease review and landlord negotiation support through to strip out, reinstatement, and final handover. This guide gives you a complete understanding of what make good means, what it costs, and how to manage it effectively.
> Lease ending soon? Request a free consultation or call Dallas on 0447 064 489 to discuss your make good obligations.
What does make good mean in a commercial lease?
Make good is the contractual obligation to return your leased premises to a specified condition at the end of your lease. In practical terms, it means undoing your fitout and restoring the space so it is ready for the landlord to lease to the next tenant.
The specific make good requirements are set out in your lease agreement, typically in a dedicated make good clause or schedule. While the exact wording varies between leases, most make good obligations in Melbourne require the tenant to:
- Remove all tenant fitout and improvements: This includes internal walls, joinery, floor coverings, ceiling modifications, signage, and any other physical changes you made to the space
- Reinstate base building services: Return the mechanical (HVAC), electrical, fire, and hydraulic services to their original configuration and working condition
- Repair any damage: Fill holes, patch walls, repair floors, and address any damage caused during your tenancy or during the strip out process
- Repaint and refinish: Repaint walls and ceilings to match the original base building finish
- Clean the premises: Deliver the space in a clean condition, free from debris and tenant belongings
- Provide compliance documentation: Supply certificates confirming services are operational, asbestos clearance (if applicable), and any required building compliance documentation
The standard against which these works are measured is usually the condition report prepared at the start of your lease. If no condition report exists — which is unfortunately common — the make good standard becomes a matter of negotiation between you and the landlord.
How much does end of lease make good cost in Melbourne?
Make good costs vary significantly depending on the extent of your fitout, the size of the space, the age of the building, and the specific requirements of your lease. Here are typical 2026 rates for Melbourne:
| Make good level | Cost per sqm | Typical scenario |
|---|---|---|
| Light make good | $80 – $150 | Minimal fitout to remove, mostly cosmetic reinstatement (paint, patch, clean) |
| Standard make good | $150 – $250 | Typical office fitout removal, base building services reinstatement, patching, painting |
| Complex make good | $250 – $350+ | Heavy fitout (hospitality, medical, retail), significant services work, asbestos, high-rise logistics |
For a typical 400 sqm Melbourne office with a standard fitout, you can expect make good costs of:
- Light make good: $32,000 – $60,000
- Standard make good: $60,000 – $100,000
- Complex make good: $100,000 – $140,000+
These figures include strip out, reinstatement, and project management. For a more detailed cost breakdown, see our make good costs guide for Melbourne 2026.
What drives make good costs higher?
- Extent of fitout: The more you have installed, the more there is to remove. A heavily partitioned office with custom joinery, a commercial kitchen, or specialist equipment will cost significantly more to strip out than a basic open-plan office
- Services modifications: If you have relocated or added to the base building mechanical, electrical, fire, or hydraulic services, reinstating them to their original configuration is one of the most expensive components of make good
- Asbestos: Buildings constructed before 2004 may contain asbestos in ceiling tiles, flooring, pipe lagging, or fire-rated walls. Licensed asbestos removal adds $5,000 to $50,000+ to the make good cost
- Building access constraints: Melbourne CBD high-rises often require after-hours work, goods lift bookings, and strict waste removal schedules — all of which add to logistics costs
- Lease requirements: Some leases have unusually onerous make good standards — for example, requiring new ceiling tiles throughout (not just where damaged) or replacing all floor coverings regardless of condition
- Time pressure: If you leave make good to the last minute, expedited work and overtime rates can increase costs by 20-40%
How to negotiate your make good obligations
Make good is not always a fixed obligation. There is often significant room for negotiation, and the savings can be substantial. Here are the most effective negotiation strategies:
Negotiate before you sign the lease
The best time to manage make good costs is before your lease begins. When negotiating a new lease, consider:
- Capping the make good obligation at a fixed dollar amount or rate per sqm
- Excluding specific improvements that benefit the building (e.g., upgraded lighting, improved HVAC)
- Negotiating a cash settlement option instead of physical works
- Including a schedule of condition as an annexure to the lease to create a clear baseline
Negotiate at end of lease
Even if your lease has a standard make good clause, there are several strategies that can reduce your costs at the end of the tenancy:
- Incoming tenant retention: If the landlord has already secured a new tenant, that tenant may want to retain some or all of your fitout. This is the single biggest cost-saving opportunity — if the new tenant keeps your partitions, joinery, and floor coverings, your strip out scope (and cost) drops dramatically
- Cash settlement: Some landlords prefer a cash payment in lieu of physical make good works. This gives them flexibility to manage the works themselves or offer the space to the new tenant as-is. A cash settlement is often less than the cost of full physical works
- Landlord improvements: If you have made improvements that genuinely enhance the building — upgraded switchboards, improved fire systems, better lighting — argue that these should be excluded from the make good scope
- Condition-based negotiation: If certain elements of your fitout are in excellent condition (near-new carpet, recently painted walls), negotiate to leave these in place rather than stripping and replacing them
Having a detailed make good scope and quote from an experienced contractor strengthens your negotiating position. It shows the landlord exactly what the works will involve and provides a realistic benchmark for any cash settlement discussions.
The make good process
A well-managed make good project follows a clear process to ensure the works are completed on time, on budget, and to the standard required by your lease.
1. Lease review (6-12 months before lease end)
The first step is reviewing your lease to understand your specific make good obligations. Pay close attention to:
- The make good clause and any related schedules
- The condition report (schedule of condition) from the lease commencement
- Any variations or amendments made during the lease term
- The timeframe for completing make good works
- Any specific standards or specifications referenced in the lease
2. Site assessment and scoping (4-6 months before)
We inspect the premises and prepare a detailed scope of works based on your lease requirements. This includes identifying what needs to be removed, what services work is required, and any potential issues such as asbestos or compliance requirements. We also review the original condition report against the current state of the space.
3. Landlord engagement (3-4 months before)
With a detailed scope and quote in hand, we help you engage with the landlord to agree on the make good requirements. This is the negotiation stage where you can potentially reduce your scope and costs. Getting agreement in writing before works commence avoids disputes later.
4. Strip out (4-8 weeks before lease end)
The physical removal of your fitout. This is typically the largest and most disruptive phase of the make good process. For details on what strip out involves, see our make good requirements guide.
5. Reinstatement (2-4 weeks before lease end)
After the strip out, we carry out all reinstatement works — patching walls, repainting, replacing ceiling tiles, reinstating base building services, and any other works required to meet the agreed make good standard.
6. Final clean and handover (1 week before lease end)
The space is professionally cleaned and prepared for handover. We conduct a final inspection with you to confirm all works are complete, then arrange a joint inspection with the landlord or their representative to formally hand back the premises.
Common make good pitfalls — and how to avoid them
We see the same mistakes costing Melbourne tenants time and money at every lease end. Here are the most common pitfalls and how to avoid them:
Pitfall 1: Leaving it too late
The single biggest mistake tenants make is not starting the make good process early enough. If you begin planning in the final month of your lease, you will face rushed timelines, premium pricing for expedited work, and no time to negotiate with the landlord. Start at least 6 months before your lease ends.
Pitfall 2: Not reading the lease
Many tenants assume they know what their make good obligations are without actually reading the lease. Make good clauses vary significantly — some are minimal, others are extremely detailed. The only way to understand your specific obligations is to read the clause carefully and get professional advice if anything is unclear.
Pitfall 3: Failing to negotiate
Many tenants accept their make good obligations at face value without attempting to negotiate. As outlined above, there are often significant savings available through negotiation — particularly if the incoming tenant wants to retain your fitout or the landlord prefers a cash settlement.
Pitfall 4: No condition report
If there is no condition report from the start of your lease, disputes about the required make good standard are much more likely. Without photographic evidence of the original condition, the landlord may claim a higher standard of reinstatement than was actually present at the start of the tenancy. If you are starting a new lease, always insist on a detailed condition report with photographs.
Pitfall 5: Ignoring asbestos
Disturbing asbestos without proper assessment and licensed removal is illegal and dangerous. Any building constructed before 2004 should be assessed for asbestos before make good works begin. Discovering asbestos mid-project causes delays, additional costs, and potential WorkSafe enforcement action.
Pitfall 6: Using unlicensed contractors
Using cheap, unlicensed contractors for strip out and make good works is a false economy. Poor workmanship leads to landlord rejections, rework, and delays. Non-compliant waste disposal can result in EPA fines. And if a worker is injured on an unlicensed site, the liability falls on you.
How to save money on your make good
Beyond negotiation, there are several practical ways to reduce your end-of-lease make good costs:
- Start early: Early planning gives you time to get multiple quotes, negotiate with the landlord, and schedule works during normal business hours (avoiding after-hours premiums)
- Combine strip out and reinstatement: Using a single contractor for the entire make good process — strip out, reinstatement, and handover — is more cost-effective than engaging separate trades
- Sell or donate fitout elements: If the landlord does not want to retain your fitout, consider selling or donating furniture, joinery, and equipment before the strip out. This reduces waste disposal costs and may generate some return
- Maintain during your tenancy: Regular maintenance throughout your lease — touching up paint, replacing damaged floor tiles, servicing equipment — reduces the scope of work needed at the end
- Get a fixed-price quote: A detailed, fixed-price quote protects you from cost blowouts. Avoid time-and-materials arrangements for make good works where the scope is well defined
- Plan your next move simultaneously: If you are relocating to a new office, coordinating your make good and new office fitout with the same contractor can create efficiencies and cost savings
Make good compliance in Melbourne
End of lease make good works must comply with several regulatory requirements:
- WorkSafe Victoria: All strip out and construction works must comply with the Occupational Health and Safety Act 2004, including safe work method statements and site safety plans
- Asbestos regulations: Pre-2004 buildings require an asbestos assessment before any demolition work. Licensed removalists must handle any asbestos-containing materials
- EPA Victoria: All waste must be managed, transported, and disposed of in compliance with the Environment Protection Act 2017
- Building regulations: If make good works affect fire safety systems, essential safety measures, or structural elements, building permits and compliance certificates may be required
- Lease compliance: The completed make good must meet the standard specified in your lease. The landlord (or their representative) will inspect the space before accepting handover
Why choose Spacez for your end of lease make good?
- End-to-end make good service: We manage everything — lease review support, landlord liaison, strip out, reinstatement, cleaning, and handover — so you have a single point of contact
- 15+ years of Melbourne experience: We have delivered hundreds of make good projects across Melbourne CBD and suburbs, and we understand the standards landlords and building managers expect
- Fixed-price quoting: We provide detailed, line-item quotes on a fixed-price basis so you know exactly what your make good will cost before any work begins
- Negotiation support: We help you engage with your landlord with a detailed scope and quote, strengthening your negotiating position
- Compliance guaranteed: We handle all regulatory requirements including asbestos assessment, WorkSafe compliance, EPA waste management, and building certifications
- On-time delivery: We understand that make good deadlines are non-negotiable. We plan and resource every project to ensure handover before your lease expires
Frequently asked questions
When should I start planning my make good?
At least 6 months before your lease expires — ideally 12 months. This gives you time to review your lease, get quotes, negotiate with the landlord, and schedule the works without time pressure.
Can I negotiate out of make good entirely?
It is possible but uncommon. If your fitout adds genuine value to the space and the landlord or incoming tenant wants to keep it, you may be able to negotiate a full or partial waiver of make good. More commonly, you can negotiate a reduced scope or a cash settlement at a discount to the full physical works cost.
What happens if I do not complete make good on time?
Your lease will typically allow the landlord to carry out the make good works themselves and charge the cost back to you — often with a management fee of 10-15% on top. You may also be required to continue paying rent until the make good is complete. In some cases, the landlord may call on your bank guarantee to fund the works.
Do I need to make good if I am renewing my lease?
If you are renewing or extending your lease, make good is generally not required for the renewal period. However, review the renewal terms carefully — some leases reset the make good baseline at each renewal.
Can my landlord claim more than what is in the lease?
Your make good obligation is defined by your lease. The landlord cannot require you to do more than what the lease specifies. However, if the make good clause is broadly worded, there can be disagreements about interpretation. Having a detailed condition report from the start of the lease and getting the make good scope agreed in writing before works begin protects you against over-claiming.
What is the difference between make good and dilapidations?
In Australia, make good is the standard term for end-of-lease reinstatement obligations. Dilapidations is the equivalent term used in the UK and some international leases. They refer to the same concept — the tenant's obligation to restore the premises at the end of the lease.
Get started with your make good
If your lease is ending and you need to plan your make good, the first step is a no-obligation site inspection and lease review. We will assess your space, review your lease obligations, and provide a detailed scope and quote — giving you clarity on costs and a strong foundation for any negotiation with your landlord.
Request a free consultation or call Dallas on 0447 064 489 to get started. We deliver end of lease make good projects across Melbourne CBD, inner suburbs, and greater Melbourne.