Spacez insight · April 2026 · 8 min read

Turnkey Fitout Melbourne: What's Included, What It Costs & How to Find the Right Builder

Everything you need to know about turnkey fitouts in Melbourne — what's included, typical costs, timelines, and how to choose the right company. Get a quote…

Turnkey Fitout Melbourne: What's Included, What It Costs & How to Find the Right Builder

Turnkey Fitout Melbourne: What's Included, What It Costs & How to Find the Right Builder

When Melbourne businesses start planning a commercial fitout, one of the first questions is: who manages what? Do you engage a designer separately, then find a builder, then manage the trades yourself? Or do you hand it to one company and get back to running your business?

That's the difference between a turnkey fitout and managing a fitout the hard way.

This guide explains what a turnkey commercial fitout means in Melbourne, what's typically included, how much it costs, and how to select the right company for your project.

What Is a Turnkey Fitout?

A turnkey fitout is a complete, fully managed commercial fit-out service where a single company handles everything from initial design through to construction, compliance, and handover. When the job is done, you simply "turn the key" and walk into your finished space.

The opposite of a turnkey fitout is a separated model, where you engage a designer, then go to tender with builders, then manage contractors yourself. This approach can work for large organisations with in-house project management, but for most Melbourne businesses, it creates complexity, cost blowouts, and delays.

What a turnkey fitout typically includes:

  • Space planning and design (2D floor plan, 3D renders)
  • Joinery and furniture design (custom to your brief)
  • Material and finish selection (flooring, ceilings, walls)
  • Mechanical and electrical (HVAC, lighting, power outlets, data)
  • Hydraulics (if required — wet areas, kitchens, bathrooms)
  • Builder's works (demolition, partitioning, suspended ceilings)
  • Joinery manufacturing and installation
  • Flooring installation
  • Audio-visual and IT rough-in (if in scope)
  • Building permit and landlord approval management
  • Project management from brief to handover
  • Defects management after handover

Turnkey vs. Design-and-Construct vs. Fitout Management

These terms are used interchangeably in Melbourne, but they have slightly different meanings:

TermMeaning
Turnkey fitoutComplete end-to-end service — design, build, handover. Nothing left for you to manage
Design and construct (D&C)Design and construction under one contract. Effectively the same as turnkey
Fitout managementA project manager coordinates separate designers and builders. More oversight required
Separated modelYou engage design, builders, and trades independently. Maximum control, maximum effort

For most small-to-medium Melbourne businesses, turnkey is the right choice. It protects your time, reduces communication gaps, and gives you one throat to choke if something goes wrong.

What Does a Turnkey Fitout Cost in Melbourne?

Turnkey fitout costs in Melbourne vary significantly based on the type of space, level of finish, and scope of work. Here are benchmark ranges:

Office Turnkey Fitouts

Fit CategoryCost Per SqmTypical Space SizeTotal Range
Basic/Budget$700–$1,000200–400sqm$140k–$400k
Mid-range$1,200–$1,800300–600sqm$360k–$1.08m
Premium$2,000–$3,500+500sqm+$1m–$2.5m+

Note: Per-sqm costs tend to decrease on larger spaces due to fixed cost spread.

Retail Turnkey Fitouts

Fit CategoryCost Per SqmNotes
Strip retail$1,500–$2,800Variable by build quality and joinery complexity
Shopping centre$2,500–$4,500Higher due to centre requirements, after-hours work
Large format$800–$1,500Larger spaces with simpler finishes

Hospitality Turnkey Fitouts

TypeCost RangeKey Variables
Café (60–120sqm)$150k–$400kCommercial kitchen, espresso bar, tiling
Restaurant (120–300sqm)$400k–$1m+Kitchen, bar, acoustic treatment, compliance
Bar/venue$500k–$1.5mLiquor licensing requirements, acoustic, specialist lighting

What's Not Always Included in Turnkey Quotes

Be clear on what is and isn't included before you sign. Common exclusions:

  • Loose furniture (tables, chairs, soft furnishings)
  • Audio-visual equipment supply (AV rough-in is often included, but not the screens or hardware)
  • IT infrastructure beyond cabling
  • Signage and branding
  • Relocation/moving costs
  • Make-good works on previous tenancy

Always ask your fitout company to provide an itemised quote and confirm what's in and out of scope.

The Turnkey Fitout Process in Melbourne

A typical Melbourne turnkey fitout follows this sequence:

1. Brief and Site Inspection (Week 1–2)

Your fitout company meets you onsite, reviews the base building conditions, and takes a detailed brief. They'll ask about:

  • Headcount, team structure, and how you work
  • Brand guidelines and aesthetic preferences
  • Budget range
  • Timeline (especially any hard deadlines — lease start date, opening day)
  • Technology and infrastructure requirements

2. Concept Design (Week 2–4)

Based on the brief, you receive concept floor plans and mood board. This stage defines the spatial layout — how many workstations, meeting rooms, breakout areas, and support spaces.

Approval at this stage is required before progressing to documentation.

3. Design Documentation (Week 4–7)

Detailed drawings are produced for:

  • Architectural and builder's works (walls, ceilings, doors)
  • Joinery and millwork (custom cabinetry, reception desk, kitchen)
  • Electrical and data (power, lighting, switching)
  • Mechanical (HVAC zones, extract fans)
  • Hydraulics (if applicable)

This documentation is submitted to the building manager (if in a strata or commercial building) for landlord/building owner approval, and to the building surveyor for permit approval where required.

4. Approvals (Week 5–10, overlapping with design)

Melbourne commercial fitouts typically require:

  • Landlord/building manager approval — required on virtually all leased spaces. Timing varies: 2–6 weeks depending on the landlord and building
  • Building permit — required where structural works, fire services modifications, or change of use is involved. Can add 4–8 weeks if not managed early
  • Planning permit — only in specific circumstances (heritage overlays, certain use changes). Rare for standard fitouts

A good turnkey company will manage all approvals simultaneously with design to minimise delays.

5. Construction (Week 8–16+)

Construction duration depends on the scope and size of the project. Typical timelines:

Space SizeBasic FitoutFull Fitout
Under 200sqm4–6 weeks6–10 weeks
200–500sqm6–10 weeks10–14 weeks
500sqm+10–14 weeks14–20 weeks

The construction phase includes: demolition (if required), builder's works, services, joinery installation, flooring, painting, and final fit-off.

6. Handover and Defects

After practical completion, a defects inspection is conducted. Any items noted are rectified before final handover. Most reputable fitout companies offer a defects liability period (typically 12 months for commercial work in Victoria).

Turnkey Fitouts in Melbourne's Commercial Precincts

Melbourne CBD

CBD turnkey fitouts involve building management approval processes (often via JLL, CBRE, Savills, or similar building managers), base building services coordination, and after-hours work restrictions. Allow additional lead time for approvals.

Southbank and Docklands

These precincts often involve institutional landlords with specific fitout guides. Major landlords (Charter Hall, GPT, Mirvac) have standardised fitout specifications you must comply with. A Melbourne-based fitout company will have these guides on file.

Inner-east suburbs (Cremorne, Richmond, Fitzroy)

Warehouse and industrial conversions dominate these suburbs. Turnkey fitouts here often involve exposed services aesthetics, polished concrete, and base building upgrades. More flexibility with heritage buildings but base building condition varies significantly.

South Melbourne and St Kilda Road

The Stonnington and Port Phillip council areas have different planning overlays. St Kilda Road — the traditional professional services address — has detailed fitout requirements for buildings managed by major institutional landlords.

How to Choose a Turnkey Fitout Company in Melbourne

1. Commercial-only experience

Ask how many commercial fitouts (not residential) they've completed in the last 2 years. A company doing 50+ commercial projects annually has significantly more relevant experience than one doing 10.

2. Relevant project type experience

If you're fitting out a restaurant, you want a company that has completed 15+ hospitality fitouts — not one that does mainly offices. The compliance requirements, subcontractor network, and design knowledge are different.

3. In-house design capacity

Some fitout companies use external designers and add a margin. Others have in-house designers, which improves integration between design intent and construction execution. Ask who will be designing your project and whether they're on staff.

4. References and site visits

Ask for 3 completed projects you can visit. A good company will be proud to show you their work. If they're reluctant, ask why.

5. How they manage approvals

Ask specifically: "Who manages landlord approval and building permits, and what's your typical timeline for this?" If they're vague, it's a risk. Approval delays are one of the biggest fitout killers.

6. Single point of contact

A turnkey project should have one project manager responsible for your fitout from design to handover. Fragmented responsibility creates communication gaps. Confirm who your PM will be before you sign.

7. What your contract covers

Review the contract carefully. Confirm:

  • Fixed price vs. cost-plus
  • Who carries risk if approvals are delayed
  • Defects liability period
  • Payment milestone schedule

Turnkey Fitout Melbourne: Red Flags to Watch

  • Quote much lower than competitors — may not include the full scope. Always compare apples to apples.
  • No site inspection before quoting — impossible to quote accurately without seeing the space
  • Vague scope documents — look for itemised breakdowns, not single line-item totals
  • No reference projects — a company that can't show you completed work is a risk
  • Approval management is "your responsibility" — if they won't manage approvals, it's not truly turnkey

Frequently Asked Questions

What does turnkey mean in commercial fitout?

Turnkey means one company designs and builds your entire fitout, managing all trades, approvals, and project management. You hand them the brief; they hand you the finished space.

How long does a turnkey fitout take in Melbourne?

For an office under 300sqm with a standard scope, allow 10–14 weeks from brief to handover. Add 4–6 weeks if your project requires a building permit. Large or complex projects run 18–26 weeks.

Is a turnkey fitout more expensive than managing it yourself?

Not necessarily. Coordinating designers, builders, and trades yourself adds your time cost and introduces risk of miscommunication between parties. Turnkey companies have subcontractor relationships and procurement advantages that often offset the management margin.

What approvals are required for a turnkey commercial fitout?

At minimum, landlord/building manager approval. Building permits are required where structural works, fire services, or change of use are involved. A good turnkey company manages all approvals as part of the service.

Can I supply my own furniture in a turnkey fitout?

Yes. Most fitout companies will accommodate client-supplied furniture. Confirm this in your brief and scope document so the company allows for your furniture delivery and placement in their programme.

Get a Turnkey Fitout Quote

Spacez delivers turnkey commercial fitouts across Melbourne — offices, retail, hospitality, and medical. One team, one contract, one phone call.

[Contact us for a no-obligation quote →]

We'll visit your space, review your brief, and provide a detailed proposal within 5 business days.

Spacez — Melbourne commercial fitout specialists. Design, build, handover.