Spacez insight · March 2026 · 8 min read

End of Lease Office Fitout Melbourne: What You Need to Know

Facing a lease end in Melbourne? Know your make-good obligations, what's required for handover, and whether a new fitout or refurbishment is right for you.

End of Lease Office Fitout Melbourne: What You Need to Know

End of Lease Office Fitout Melbourne: What You Need to Know

Your Melbourne office lease is ending. Before you hand back the keys — or before you sign a new lease in a new premises — there are fitout decisions to make that will significantly affect your budget.

This guide covers everything Melbourne businesses need to understand about end of lease fitout obligations: what "make good" means, what landlords can actually require, how to minimise your make-good liability, and what happens when you're moving to a new tenancy and need a fresh fitout.

What Is a Make-Good Obligation?

When you lease commercial space in Melbourne, your lease almost always includes a make-good clause — a requirement to return the premises to its original condition (or a specified condition) at lease end.

What this typically means:

  • Removing all fitout you installed during your tenancy
  • Repairing any damage beyond fair wear and tear
  • Restoring walls, floors, and ceilings to their pre-lease state
  • Removing signage and patching holes
  • In some cases, repainting to a specified colour

What it doesn't always mean:

  • Returning the space to bare concrete (this depends on what the space looked like when you took it)
  • Replacing items that have simply aged (wear and tear is not damage)
  • Restoring modifications made with landlord consent if the landlord agreed to waive make-good on those items

The key document is your lease. Make-good obligations vary significantly between leases. Read the relevant clauses carefully before assuming what's required.

Make-Good in Melbourne: Common Scenarios

Scenario 1: You Installed a Full Fitout from Shell

If you took a bare shell tenancy and fitted it out — new partitions, ceilings, flooring, joinery — your lease likely requires you to strip it back to shell at lease end.

This is the most expensive make-good scenario. Strip-out costs in Melbourne typically run $50–$150/sqm depending on the complexity of the fitout being removed and the building's requirements.

What to do: Get a make-good assessment from a fitout company before your lease expires. The earlier you know the scope, the more time you have to budget and negotiate.

Scenario 2: You Took a Fitted Tenancy

If you took a space that was already fitted — carpet, ceilings, partitions from a previous tenant — your make-good obligation may be minimal: patch, paint, clean. The base condition was a fitted tenancy, so that's what you need to return.

What to do: Check your lease and review any condition report done at lease commencement. That report documents the starting condition and is your baseline for make-good.

Scenario 3: You Have a Landlord Fitout Contribution

Some Melbourne commercial leases include a landlord incentive — a contribution toward your fitout cost in exchange for a longer lease term. These arrangements sometimes include specific make-good waivers or reduced make-good requirements. Check your lease carefully.

Scenario 4: The Landlord Has a New Tenant Ready

If your landlord already has a new tenant signed who wants a completely different fitout, they may not actually want you to do a full strip-out. A demolished space that requires a new fitout is sometimes more useful than a stripped shell.

In this situation, negotiate. Landlords sometimes waive make-good requirements or accept a cash payment in lieu of physical works. We've seen Melbourne landlords accept $30,000–$60,000 cash settlements to waive make-good on fitouts that would have cost $120,000+ to strip out.

Negotiating Your Make-Good Obligation

Make-good is negotiable — both when you sign the lease and when the lease ends.

At lease inception: Try to negotiate a make-good cap (maximum dollar value), a waiver for specific items, or a right to leave approved fitout improvements in place. These negotiating points are much stronger before you sign than at lease end.

At lease end: If the landlord has a new fitout planned anyway, the actual strip-out may not serve their interests. Cash in lieu of works is a common resolution in Melbourne's commercial leasing market.

Engage early: Start make-good conversations 6–12 months before your lease expires. Leaving it to the final month is where businesses get hurt — you have no negotiating position and no time to plan.

When You're Also Doing a New Office Fitout

Many Melbourne businesses reaching a lease end are simultaneously planning a fitout in their new premises. This creates a logistical and financial challenge: you're paying for make-good in the old tenancy while paying for a fitout in the new one.

Some strategies that help:

Overlap your lease terms strategically. If you can negotiate a short overlap (1–2 months) where you hold both tenancies, you can complete your new fitout before moving, avoiding the cost of temporary premises.

Use the same company for both. A fitout company doing your make-good and your new fitout can sometimes recover usable materials — joinery, glass partitions, doors — from the old tenancy and reuse them in the new one. This reduces both your strip-out waste and your new fitout cost.

Time your move to avoid weekend storage. Plan the physical move to go directly from old tenancy to new tenancy in a single move, with the new fitout complete before you vacate the old space.

The Lease Handover Inspection

Most Melbourne commercial leases require a pre-handover inspection — a walkthrough with the landlord or their representative before the formal lease expiry to identify make-good items.

Request this inspection early. Don't wait for the landlord to schedule it at the last minute. A pre-handover inspection 6–8 weeks before lease expiry gives you time to complete required works before the deadline.

Document everything. Photograph the space before, during, and after make-good works. If a dispute arises about whether damage existed before your tenancy, documentation is your protection.

Understand what "fair wear and tear" means. In Victorian commercial leasing, tenants are not responsible for deterioration caused by normal use over time. Worn carpet in a high-traffic area after 5 years of occupation is fair wear and tear. A hole in the plasterboard is not. Faded paint is debatable. Your fitout company can help you assess what is and isn't fair wear and tear.

Make-Good vs. Fitout Refurbishment: Which Do You Need?

Sometimes the right answer at lease end isn't a strip-out — it's negotiating to leave your fitout in place, with an agreed payment to the landlord for any modifications needed, and a commitment to a short refurbishment.

If your fitout is less than 5 years old and in good condition, there's a strong case for this approach:

  • The landlord avoids the cost and time of a bare shell re-fitout
  • The next tenant may be able to use much of your fitout with minor modifications
  • You avoid strip-out costs

This is worth exploring if your fitout is relatively modern. The worst the landlord can say is no.

Fitout for Your New Melbourne Office

If you're moving to a new tenancy at lease end, you need a fitout for the new premises. The principles are the same as any office fitout — but there are a few end-of-lease-specific considerations.

Start earlier than you think you need to. A new 300sqm CBD office fitout in Melbourne takes 14–18 weeks from design start to move-in. If your lease expires in 4 months, you needed to start yesterday.

Budget for both simultaneously. Make-good in your old tenancy + new fitout in the new tenancy hits in the same period. Many Melbourne businesses underestimate this double-up. Build both into your project budget.

Consider what you can move. Loose furniture, screens, collaborative furniture, technology — these can move. Built joinery generally can't. Plan what moves and what gets replaced.

For a detailed breakdown of new office fitout costs, read our commercial fitout cost guide. For a full timeline breakdown, see our office fitout timeline guide.

How Spacez Helps with End of Lease Fitouts

We help Melbourne businesses navigate end of lease in two ways:

Make-good services: We assess your make-good obligations, advise on what's actually required versus what the landlord wants, manage the strip-out and reinstatement works, and document everything for handover.

New office fitouts: We design and build your new tenancy fitout — ideally staged to be complete before you vacate your old space.

Doing both through one company means coordination between the two projects, potential material reuse, and a single point of contact across a complex transition.

Frequently Asked Questions

What does a commercial make-good typically cost in Melbourne?

Make-good costs vary enormously: a simple condition clean and patch might cost $5,000–$20,000. A full strip-out of a large fitted tenancy might cost $100,000+. The condition of your lease's make-good clause and the state of your fitout are the determining factors.

Can I negotiate to leave my fitout in the space?

Yes, and it's often worth trying. Particularly if your fitout is modern and in good condition, the landlord may prefer a cash payment or a short refurbishment over a complete strip-out. Approach this conversation early — ideally 6–12 months before lease expiry.

What if I leave without doing my make-good?

The landlord can pursue you for the cost of the works. This is a genuine legal liability under your lease. Don't ignore it — address it, negotiate if possible, and manage it properly.

Do I need a lawyer for make-good negotiations?

For significant make-good obligations, yes. A commercial property lawyer can review your lease obligations, advise on what's enforceable, and assist with negotiations. For straightforward minor make-good, it's often practical to handle directly.

How long does a make-good strip-out take?

A typical office strip-out in Melbourne takes 1–3 weeks depending on the size of the tenancy and the complexity of the fitout being removed. Plan for this in your lease end timeline — you can't hand back the keys the day the lease expires if works need to be done first.

Can I do make-good myself?

For minor works (painting, patching, cleaning), some tenants manage this themselves. For structural works, electrical, mechanical, or anything requiring a permit, you need licensed trades. And in most Melbourne CBD buildings, all works require building management approval regardless of scope.

Get an End of Lease Assessment

Approaching lease end and not sure what you're up for? We can assess your make-good obligations and give you a realistic picture of scope and cost — before you're in the last month scrambling.

Contact Spacez for a make-good assessment or learn more about our office fitout services in Melbourne.